Màng cho đầu dò Chlorine - Residual Chlorine Membrane Suntex

Residual Chlorine Sensor, (4P, 0-20ppm, operating
range pH5.5~8.0)

Máy đo Chlorine dư/Ozone CT-6300 Suntex

Extremely powerful and valuable

The CT-6300-RS transmitter has rugged IP 65 enclosure and can be wall, panel, pipe mounted in almost any industrial application. When compatible with residual chlorine electrodes or ozone electrode, the complete system is extremely powerful of detecting the free chlorine or
ozone in drinking water, swimming pool applications. The transmitter inherits our reliable technology which features in accurate, robust, and easy to use functions.
 

Applications:

• Swimming pool
• Drinking water
• Industrial process
• Water treatment

Features:

• Sensor type: Both two-wire and four-wire compatible
• Automatic function: auto cal, self-test, and error code indication
• IP 65 waterproof and dustproof design
• Back-lit LCD with ON/OFF/Auto programmable illumination
• Isolated current output DC 0/4~20mA corresponding to measurement
• Two Hi/Lo Limited contact outputs; Set points with programmable hysteresis function
• Automatic temperature compensation
• Gradually continuous sample measurements average function to enhance stability
• Wash function with programmable time-interval control
• LED indication alarm or wash status signal
• Display of the last calibration time and sensor slope
• Password protection
• Equipped with one analog output and one RS-485 interface

Đầu dò đo Oxy hòa tan - DO sensor Suntex

D.O. Sensor, with 7m cable

Application:

• Wastewater
• Fish farm

Máy đo Oxy hòa tan DO DC-5300 Suntex

Precise calculation in various applications

The DC-5300 D.O. transmitter has rugged IP 65 enclosure and can be wall, panel, and pipe mounted for installation in mainly wastewater, fish farm, environment and fermentation applications. Its excellent signal processor and precise salinity and pressure compensation make DC-5300 the extremely powerful instruments you can trust.

Applications:

• Wastewater treatment
• Fish Cultivation
• Environment
• Fermentation

Features:

• Concentration and saturation of dissolved oxygen measurement
• Measurement unit: ppm, mg/l, %, °C
• Compatible with WTW TriOxmatic 690 & 700, and Mettler Toledo InPro 6050 & 6800 sensors
• Back-lit LCD with ON/OFF/Auto programmable illumination
• Two sets of isolated current output DC 0/4~20mA corresponding to measurement and temperature
• Two Hi/Lo Limited contact outputs; Set points with programmable hysteresis function
• Salinity correction & atmospheric pressure correction
• Gradually continuous sample measurements average function to enhance stability
• Wash function with programmable time-interval control
• Display of the last calibration time and sensor slope
• Password protection
• DC-5300RS with one analog output and one RS-485 interface

Máy đo oxy hòa tan DO DC-5110/5110RS Suntex

Applications:

• Water and wastewater treatment
• Industrial Process
• Fermentation
• Environment

Features:
 

• 96 x 96mm Intelligent D.O. transmitter
• Waterproof and dustproof design
• Compatible with WTW TriOxmatic D.O. sensors or Mettler Toledo InPro D.O. sensors
• Measuring unit: %, ppm, mg/l
• Salinity correction & Atmospheric pressure correction
• User-friendly operation with text and graphic illustration, clear signs and easy to understand
• Large LCM display with auto-sense backlight and contrast setting function
• Sensor slope performance display
• Sensor self diagnosis for TriOxmatic 700 D.O. sensor
• Simultaneous display of measurement value and temperature
• Automatic temperature compensation
• Two sets of isolated current output DC 0/4~20mA, Max.500Ω
• Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable
• set-points and hysteresis
• Gradually continuous sample measurements average function to enhance stability
• With password and multi-key design-security protection enhancement
• Automatic sensor clean function with programmable time interval
• LED indicated alarm or washing status signal
• IP 65 (NEMA 4X)
• Measuring value can be selected for figure or chart display
• Trace mode can display historical measured value curve from 3-minute to 4-week program
• Equipped with logbook function
• Equipped with one analog output and RS-485 interface

Thiết bị đo tỉ trọng trong dung dịch SG-2100-RS Gravity transmitter Suntex

Applications:

• Electronics industry
• Chemical industry

Features:

• Waterproof and dustproof design
• 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
• Measuring unit: SG/°Bé/ ppt/ %
• User-friendly operation with text and graphic illustration, clear signs and easy to understand
• Measuring value can be selected for figure or chart display
• Trace mode can display historical measured value curve from 3-minute to 4-week program
• Equipped with logbook function
• Large LCM display with auto-sense backlight and contrast setting function
• Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
• Cell constant, Pure water, Known solution— 3 types calibration
• Simultaneous display of measurement value and temperature
• Automatic temperature compensation for setting
• Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
• Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
• With password and multi-key design, enhanced security protection
• LED indicated alarm
• IP 65 (NEMA 4X)

Specific Gravity Sensor:

• Load Cell & plummet principle
• High accuracy & long lifetime of reliability
• Wide range measurement
• Anti-acid gas design

Máy đo độ đục/chất rắn lơ lửng TSS online TC-7100 Suntex

Robust protection and precise integration

The TC-7100-RS Turbidity / Suspended solids transmitter has rugged IP 65 enclosure and can be wall, panel, pipe mounted for installation in almost any industrial application. The TC-7100RS offers RS-485 interface to support digital communication to your PLC. The transmitter inherits our reliable technology which features in accurate, robust, and easy to use functions.

Applications:

• Wastewater treatment
• Industrial process
• Water treatment
• Surface water

Features:

• Turbidity, Suspended solids, and Temperature measurement
• 5 points calibration
• IP 65 waterproof and dustproof design
• Back-lit LCD with ON/OFF/Auto programmable illumination
• Isolated current output DC 0/4~20mA corresponding to measurement
• One RS-485 interface for digital communication
• Two Hi/Lo Limited contact outputs ; Set points with programmable hysteresis function
• Gradually continuous sample measurements average function to enhance stability
• Wash function with programmable time-interval control
• LED indication alarm or wash status signal
• Password protection

Thiết bị đo chlorine dư CT-6110-POL Suntex

Extremely stable and valuable

The CT-6110-POL is a non-reagent type, non-membrane type residual chlorine system. The transmitter is a dual channel measurement include both residual chlorine and pH measurement. The motor drive rotating sensor system keeps the sensor clean and reduce the troubled maintenance work. The high stability, high resolution, low consumables features make the CT-6110-POL highly welcome in the market.

Applications:

• Drinking water
• RO water dechlorination
• Swimming pool
• Cooling water
• Beverage industrial packing bottle sterilization

Features:

• 96 x 96mm intelligent redisual chlorine & pH dual-channel transmitter
• User-friendly operation with text and graphic illustration, clear signs and easy to understand
• Measuring value can be selected for figure or chart display
• Trace mode can display historical measured value curve from 3-minute to 4-week program
• Equipped with logbook function
• Large LCM display with auto-sense backlight and contrast setting function
• Polarogram scanning function to find suitable polar voltage & gain to ensure the accuracy especially for
• high conductivity sample
• Electrode open circuit & water outage diagnostic function for auto motor shut down protection
• Simultaneous display of residual chlorine value, temperature and pH value
• Automatic pH & temperature compensation
• Cl2/pH selectable, two individual limited contact outputs with programmable set-points and hysteresis
• Equipped with Cl2/pH isolated current output and RS-485 MODBUS interface
• Gradually continuous sample measurements average function to enhance stability
• With password and multi-key design, enhanced security protection
• Auto clean/Auto zero function with programmable time interval
• LED indicated alarm or washing status signal
• Non-reagent type Cl2 sensor reduces operation cost
• Rotating sensor auto clean reduces maintenance work
• Optional pH measurement for compensation
• Over heat motor protection